Different finishes for wood projects by ArtMillWork Design

Beyond their capabilities to create biodiverse ecosystems and turn greenhouse gases into clean oxygen, trees also provide one of the most versatile materials on the planet- wood. In addition to being used by carpenters and builders for framing houses, wood is perhaps most commonly used for furniture and flooring, here in the US and around the world and at our shop ArtMillWork Design.

When properly maintained, wood lasts a long time- generations. But part of maintaining wood means adding a finish. Using a finish on wood furniture and art helps modulate the humidity content of the wood. When wood dries out too much, it is prone to cracking and splitting, so it’s important to seal in the appropriate moisture content.

There are lots of options for finishing wood, but when it comes to furniture and decor, most products fall into one of these categories: oils, varnishes, polyurethanes, lacquers, and waxes.

Oil finishes are commonly used on wood furniture and kitchen utensils, and sometimes on wood floors. Generally speaking, oil finishes are eco-friendly, food-safe, and non-toxic. They’re also easy to repair and produce a more textured grain pattern than many alternatives. They tend to be considered a more traditional finish, as oils have been used as wood finishes for thousands of years. Here at our shop in Brooklyn NY, we use polyurethane finish for a long-lasting and noninvasive finishing of our parametric wood wall art  

However, oil finishes generally don’t offer the same level of protection and durability that you’d find with a lacquer or varnish. They’re not as water-resistant as some other finishes, and oil finishes are also more susceptible to dents and scratches because the wood doesn’t have a thick hard coating on top to absorb those impacts, such as a varnish or lacquer might do. Because of their poor water resistance, oil finishes are often combined with waxes to add a layer of protection. Our ArtMillWork shop located in the heart of Brooklyn makes the art to last for years to come by adding a fine layer of lacquer finish to the art.

Some of the most common oil finishes used on wood furniture and flooring are:

Linseed Oil

Tung Oil

Mineral Oil

Walnut Oil

Teak Oil


Wax finishes sit on the surface of the wood and offer mild resistance to water and scratches. They’re also generally susceptible to heat damage, often in the form of rings beneath a cup of hot coffee or tea. Another hindrance to waxes is that they will wear over time and necessitate periodically refinishing, as it simply gets rubbed off. This is why wax finishes do not work well with our wood wall art as they would require our customers to refinish them every couple of years so that the stains and attributes of their panel would stay as fresh as when they got to them.

Some of the most common types of waxes used for finishing wood furniture and flooring include:

Carnauba Wax

Bee’s Wax

Paraffin Wax


Although “varnish” is often used as a catch-all term for wood finishes, there is actually an accepted definition for what constitutes a varnish and what doesn’t. Varnish finishes are resin-based finishes that dry to a hard film that coats the surface of the wood. Varnishes are typically the most durable type of wood finish- drying to a very durable hard coat that is usually resistant to water and scratches. Traditional varnish dries to a clear finish, although most staining finish products fall into this category as well. Varnishes are popular for both indoor and outdoor use, on both furniture and floors.


Like varnishes, polyurethanes form a hard film that coats the surface of the wood. This is in contrast to oil finishes, which seep into the grain and saturate the wood. Polyurethane finishes are usually brushed onto wood and dry to a hard plastic-like film. These finishes are generally durable- scratch and water-resistant, as well as low maintenance. They’re very popular finishes for indoor wood flooring, and they’re also used often on wood furniture. As mentioned before our shop from Brooklyn NY uses a polyurethane finish so our clients get the longest terms for their art pieces.  

However, poly finishes often have a yellowing effect as they age, which makes them more suited to darker woods. You probably wouldn’t want to use it as a finish in an outdoor environment, as some type of varnish is usually the better choice for protecting against the elements. Our finish is consistent only for indoor use. Direct sunlight might hurt the structure of such finish and with time warp the wood. There are several types of polyurethane, including oil and water-based, and it’s worth researching more about which of these is best suited for any given project. Our projects use only water-based finishes as they are the most non-toxic for working and the household environment. Lacquer is a modern wood finish that is commonly used on high-end furniture, but not usually on flooring. It is fast drying, impervious to water, and maintains its transparency as it ages. Lacquer finishes are popular because they don’t yellow with age, protect well against liquids, and require very little maintenance.

Lacquers are comparable to varnish or urethane but are usually sprayed on rather than applied with a brush or hand-rubbed cloth. Like varnish and urethanes, and in contrast to oil finishes, lacquer forms a film on top of the wood grain rather than saturating it. The use and advancement of lacquer finishes have made shellac largely irrelevant since the mid-1900’s.

There are several different types of lacquer, and although all lacquer finishes share some of the key characteristics mentioned above, there are some key differences between them as well.

We hope this helps our clients understand why we do not suggest placing their art panels outdoors and how it is beneficial to clear coat finish the art.